u/I-Code-Things

I ended up picking up xreal and it worked flawlessly so it is definitely something on the xreal side. Maybe they'd be able to fix it with software updates but I'm not positive. I was able to get some picture, but it was not usable. One mode it'd only bring in the green channel so you just saw one shade of green and black. Another mode would show double images overlaying each other and moving all over the place.

Yes, it didn't work. I ended up having to return everything.

I just downloaded the mac verison and I don't see seedance 2 on the list of models. How can I access it?

Yep, ill put in the full duplex outlet. This switch + outlet combo is in the kitchen counters granite so it definitely isn't worth trying to mess with that for an unused switch lol. Thanks for all the help

Turns out you're right!

I busted out the blueprints that the original owner left. There were a few inaccurate things, but it showed the 1st pendant light had an extra wire to some non-existant switch. Also on the circuit were some outlets.

I thought maybe it was this blank plate cover, but that was nothing except a clear view of the back of the 2 gang box.

Anyway, I followed the circuit and it turns out one of the outlets had a light switch on it. I don't know how I never saw that before lol. My wife knew it was there but not me.

So it sounds like I'm either SOL, Or that I replace the switch with an outlet with just a regular outlet and then abandon the cable like you mention in your other comment.

Thanks for the very detailed reply.

So, the lights I want to control are in a 3-way configuration. There isn't a 4-way switch. Only 2 switches can control the lights - the left switch in the 3 gang, and the right switch in the 2 gang.

In the 3 gang, the other 2 switches are on a completely different circuit, but in the 2 gang, the other switch controls a different light.

Now, above the 2 gang switch there is another switch controlling a (lightless) multi-speed fan. There are outlets and a switch on the other side of the wall I am assuming are on the same circuit which is why there is so much romex in that one box.

One issue I'm seeing though is in the wiring diagram, the smart switch should have the 120v power source. I'm not seeing that in the 3 gang. The other wires in that box are on a different circuit.

Sadly no.

Not sure who downvoted you. I had not. After your comment I did go and update the firmware on both the glasses and dock.

Unfortunately both issues still remain. The drift is much better, but even after a 20 second calibration it still drifts a couple of feet in space over a couple minutes.

The camera feed still glitches out in the same way unfortunately.

It supports "USB Streaming (UVC/UAC)" which if I understand right means it can be used as a webcam. I'm not sure how the technology works exactly but I had just assumed the glasses would work with it. Hopefully I just don't have the right settings. Having to buy another $130 devices and carry that around as well would be a huge bummer.

This makes a lot of sense. Thanks!

No. I didn't do anything before switching except for setting up the AMS. It looks like I have a lot more to learn.

The first 2 prints after the switch were flawless which is odd.

Pretty slick

That makes sense. The youtubers got me once again

For PLA it doesn't actually utilize it's air filter. The exhaust just comes out holes in the frame. For higher-temp filaments it does exhaust stuff through the filter.

Thanks everyone, I'm going to go with the P1S. While the P2S looks nice, the air filtering issue was the biggest deal-breaker since it'll be in the office with me.

Huh, super weird. I'm now also getting a ton of duplicate threads. My bad then.

Reddit Search is trash then. I only saw one similar thread from 3 weeks ago. Granted I didn't do more than 3 searches, but that should have been enough.