u/42thehammer42

Under 5 year olds?

Try neopixel. I think there's a chance fast led doesn't work with SK6812. Here's an old forum post: https://github.com/FastLED/FastLED/issues/482

My config is:

light:
    - platform: neopixelbus
      pin: RX
      num_leds: 60
      name: "neo_pixel"
      id: neo_pixel
      variant: SK6812
      type: GRBW

I've noticed that as well. Tried to google it, but couldn't find anything.

Probably not quite what you're looking for, but if you're just interested in making just a few switches accessible: you can use the telegram integration to send some simple commands.
https://www.home-assistant.io/integrations/telegram_chatbot/

https://en.wikipedia.org/wiki/Betteridge%27s_law_of_headlines

https://en.wikipedia.org/wiki/I._German/Dutch_Corps

Thinking about it, the other thing I remember made a difference was supplying the board with 5v rather than 3.3v.

What does your configuration file look like? I vaguely remember having a similar problem. The current one that works for me is this:

esphome:
  name: camera
  platform: ESP32
  board: esp-wrover-kit

wifi:
  ssid: 
  password: 

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

# Example configuration entry
esp32_camera:
  name: ESP32 Camera
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  max_framerate: 20 fps
  idle_framerate: 0 fps
  i2c_pins:
    sda: GPIO26
    scl: GPIO27
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32
  resolution: 640x480
  jpeg_quality: 30

output:
#flashlight
  - platform: gpio
    pin: GPIO4
    id: gpio_4
#statuslight
  - platform: gpio
    pin:
      number: GPIO33
      inverted: True
    id: gpio_33
light:
#flashlight
  - platform: binary
    output: gpio_4
    name: $hostname flash
#statuslight
  - platform: binary   
    output: gpio_33
    name: $hostname status

Coat of arms, I guess.

San Marino.

If it's just one or two lines that need updating, you can simply do the following: http://stackoverflow.com/questions/4897359/output-to-the-same-line-overwriting-previous-output-python-2-5

Well, robot is famously a Czech word: https://en.wikipedia.org/wiki/Robot I would guess that technically it did come to Japan via a detour in English though.

Pretty!