u/SystemsOgreLoad

I'm not OP but I may be interested. DM me?

https://preview.redd.it/9wq0h9qhdbhh1.jpeg?width=1080&format=pjpg&auto=webp&s=7cea0a71165f6d177e7913288448edff192eded8

I did not. I've been using digital out since I only have 2 channels still. Eventually going to add a center channel, but other car repairs have me busy

u/PhotoMarketBot Bought Ricoh GRI from u/musicologo10

I don't understand, how are you doing this with a 4 second shutter? Wouldn't you need to have a quick shutter with burst?

Awesome shot btw. Framing is on point

Pm

Thanks, shoot me a message if you have any questions. Also in hindsight, I should've gone with the 9" size like yours. It would've blended in a bit more

Oh btw I have a write up on the custom sound system. A bit more niche but just in case it's up your alley https://www.diymobileaudio.com/threads/land-rover-lr3-active-crossovers-and-under-seat-mounting.481128/

I wrote an install guide for one. There's info on installing 360 cameras so the back up cam part might be useful https://www.disco3.co.uk/forum/oversized-android-head-unit-360-camera-install-guide-210327.html

Oh shoot, thanks for the reminder. I wrote a guide on disco3 a while back. Still working great https://www.disco3.co.uk/forum/oversized-android-head-unit-360-camera-install-guide-210327.html

That's robbery! I can pull out the driver seat and amp in 30 minutes. I'd be happy to walk you through it. I also just happened to pull my Harman kardon amp out of mine because I put in an aftermarket amp. I'd be willing to sell it to you for lower than whatever price you find, message me if you're interested.

Just a rundown of how to change it: There's 5 plastic pieces you pry. Then you detach the battery negative, wait 20 minutes, and then detach the wire harness under from front of the seat. An M7 bolt needs to be unscrewed. Then there are 5 T50 bolts holding the seat down which need to come out.  Don't worry about the seatbelt. You can now pull the entire seat into the back of the car if you fold the seats fully flat.  There's 4 small bolts holding down the amp and voila

it's quite odd. that's what i have things set to. I'll try doing a factory reset to get a better baseline. thanks for your help

also, it's unfortunate that people are writing off this nice unit just because it's Chinese

Hey mate, would you still be able to send photos when you have the time?

Hmmm I do have the controls. I get the call screen coming up when I get a call and it goes away after. Maybe I can disable calls entirely to test

I'm using 0db 40hz and 1khz test tones at max volume. Should i use music instead? It's running directly off the head unit through vlc

Amir and Rawcat both say the RCA output is really good out of this unit. There's plenty of Chinese units but this isn't one of them. I may be measuring wrong or have an incorrect setting. I'm not clipping at max volume so that tells me I'm still not pushing the hardware fully. Plus their measurements go up to 4.6v

Pmed

Did you ever try this? I'm in the same boat now

pm

Do you know what the point of bridge mode is then? Why not just bypass the google hardware? I really wish they had an access point mode so I didn't need new access points to use a custom router..

Bought mora 420 and parts from u/happy_polar_bear_ on https://www.reddit.com/r/hardwareswap/s/2Abha2hsO8

Bought 5950x from u/emmedup1119 on https://www.reddit.com/r/hardwareswap/s/zN8w7GgtGd