u/WiconsinGrey

The metal or plastic ones!? I broke one of the plastic ones over torquing it, (my fault) but never broke the metal lipped one. I just didn’t like they drained batteries in a month with out use

Inforce is the only light I’ve put on a g19 that doesn’t tilt up in the front. I don’t know why others haven’t figured this out. Hate the inforce but the fit is great.

Ap5 SEF 2026 purchased. Had also read things(might work or might not) and were fixed by adding genuine HK parts so I just went all in.

I had HK ejector + spring, extractor +spring, RB frt, 90degree lp+ trilug suppressor added before ever fired. 0 malfunctions through 2k rounds. (First 450 rnds 124gr nato) (147 hst + 150 Syntech only diet since break in). HK mags only.

Has been a blast.

https://preview.redd.it/0qhh3r5c6uxh1.jpeg?width=1179&format=pjpg&auto=webp&s=2e537ad041016c1860dd7455af26020904e14aba

It doesn’t match Magpul FDE or regular FDE. It’s a much darker fde. In this lighting it looks close. In certain lighting it’s completely different

Bought a blem for $699, having it cerakoted for $130… I’m less than $900 in for a m9a4. Just get creative!

And the blem was hilariously irrelevant

https://www.reddit.com/r/gundeals/s/SKbbobRejQ

I just bought a blem for $799… so $600? Maybe? Worth what ever someone’s willing to pay I guess.

1.) look at the gun, take your time. Look at the welds, the finish, the fitment of parts. Look down the sights. Do it all again.

2.)Rack the charging handle. Is it firm but smooth? Good. Drop the bolt, does it return to battery with authority? Good. Do this a couple times since that brace sometimes causes the bolt to bind.

3.) take one of the mags. Insert it with the bolt open. Does it have some wiggle? good. Drop the mag, does its drop smoothly? Good.

Extra, get a feeler gauge and check bolt gap. Or ask the gun counter if they have one and test it.

Sometimes you won’t know fully until you shoot it. And that’s ok. There is a great community to help you out if that ends up being the case.

Holy smokes… that’s fucking gassy, especially without a can

Post pics. My 20 and 16” barrel runs both mags no issues.

What is medium to long range in your opinion?

And I only ask because to some 500-800m is long range. And that’s achievable with a well built AR15 which is easier to do in the $2k price range with a $1k optic.

I take back my stance on nothing should be taken serious. Bed bath and berserk is hilarious, solid call out.

My man, look at his profile. With those bed sheets and wallpaper (are those bed sheets with holes as drapes), nothing he says should be taken seriously.

Springs would have been the next step. But I saw improvement in the first box of +p so I just kept sending it and it improved.

So I had similar issues. (Brand new g19.4 + brand new SEF barrel+ sc-s). All the failures, failure extract, eject, return to battery. Ran lots of white lithium, ran less white lithium, still failures. Then I ran 200 rounds of 124gr +P, it went from every other round, to every couple rounds, to every other mag, to now it runs great. However I did swap the piston after this anyway just because I was tired of it backing off and now have Griffen ez lok. Works 99% (it had one failure to return to battery since new piston). 800ish rounds through it now, last 400 have been 150gr Syntech and it sounds and shoots great.

Hahaha to each their own

I also sold an apc9 pro but kept the ghm9. Imo the ghm9 looks better and I like how it shoots so it stayed.

🤣 that is fucking awesome. Very cool man!

What are these mounts!?

It’s how it goes, looking forward to the full size release coming out from AI now!

Well shoot. I was stoked on that.

Was there only one of each yesterday? Got a refund for it this morning.

I saw that.. very unfortunate, but he’s going to get fucked. They will find him.

Seekins msrp I think is $2800… so I wouldn’t consider it paying through the nose at all. And again, nothing against psa, but they are hobbiest grade rifles. Seekins is in another weight class. I like LMT because I can swap from a 20” to a 16” with a torque wrench and 2 minutes of time. I shoot long range with the 20” i hunt with the 16”.

500+ yards you will get from a psa. I’ve taken my 20” to 1300 and the 16” to 1000 and it was not difficult to get on 2 moa steel (6.5CM). Twist rate matters, but not as much as you think. Finding the bullet/load that an individual rifle likes the most is what you are after. Twist impacts the selection process. My 20” barrel like 140gr Berger hybrids (.9moa 10 round group), my 16” likes 140gr fgmm smk(1.0 moa 10’round group. My 20” with fgmm smk is consistent 1.2 moa shooter. So find the bullet your rifle likes and stock up.

With this said. And this is not personal in the slightest, if you are questioning the twist rate, the psa is going to be for you. Get started with long range on it, if you enjoy it, it will be an extremely easy rifle to sell and then you upgrade. Or you might find it does all you need it to do!