u/samwiseg0

the date on the line item seems to indicate this was agreed when Biden was still in office.

https://www.reddit.com/r/nottheonion/comments/1io1tdt/comment/mcfonra/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

I do not since I have not had access to one. If someone would like to commission me to make a case for it. I would be willing to discuss it with them.

Thank you! I do try to take care of my customers as best I can!

Do you mind fixing the link so its the share and save one?

https://watchtower3d.etsy.com/listing/1597038478/ratgdo32-v253i-v252i-v25i-v25-v20

Thanks!

You have to keep MyQ for amazon deliveries.

Did you happen to lock your remotes? It will blink when the remotes are locked out. Aka vacation mode.

As others have pointed out it will also blink when it is out of sync but pressing the button will make it re sync.

The easy way would be to use Home Assistant Cloud.

Sadly, Paul removed the documentation for 2.0.

You can go back in time on github to see the repository before he removed the image.

I re-uploaded the image just incase github removes it. V2.0

You can use HA to expose those entities via HomeBridge. Yes.

https://www.home-assistant.io/integrations/homekit/

If you can, I would suggest running the ESPHome firmware mostly because it will allow you to check the signal from the ESP itself. That may allow you to optimize the ESPs orientation/location. It also may allow you to move your router or access point to a more optimal location. This will also help determine if its the firmware or in fact a signal problem with your ESPs.

You do not have to keep using the ESPHome firmware but it will allow you to see what the ESP thinks and troubleshoot from that end.

You can ignore the connector on the left unless you want to use dry contacts. Here is an image that simplifies and uses your exact version. Hopefully this helps.

https://i.imgur.com/wXQE0To.jpg

Edit: Here is another post that has multiple images with your exact version. https://www.reddit.com/r/ratgdo/comments/19bkz95/ratgdo\_253\_wiring\_details/

Which firmware did you load on your ratgdo?

The email to use is [email protected].

You can find this information at the bottom of the FAQ & Troubleshooting page.

https://paulwieland.github.io/ratgdo/09_faq.html

Thank you! So glad everyone is enjoying them!

Thank you for buying a case from me! :)

Awesome! Thank you!

Thank you for including my cases in your list, especially since you are selling other cases! If you do not mind, can you update the links to be the share and save ones?

Edit: Links are up to date now. Thanks!

Free 3D Models for Ratgdo v2.0, v2.5, v2.5i, 2.52i, & 2.53i:

Model files can be found on printables.

Etsy Store Links:

Version 2.5i, 2.52i, & 2.53i (Integrated ESP)

Version 2.5

Version 2.0

Thanks again!

https://anonfiles.com/P4IdF4Eay2/My_Response_To_The_Backlash._Is_MoistCrit1kal_Right_Fetterman_Oz_Debate_Hasan_Piker_Dana_Nessel_mp4

I have the base SR5 so I had to drill a hole with a step drill and add this so the pads just connect inside the console.

Other trim models already have the inverter and I think the 12v socket.

I mention it in the description on printables.

interested

Follow this FAQ to secure your Tautulli instance.

I have 2 disparate clusters consisting of 3 controllers each to work with a new feature from Aruba called Multizone. (https://goo.gl/KTlOdN).

The 7220 was my primary controller but now just handles remote access points. I plan on migrating to just the 7005 cluster in a few months.

The Cisco controller is just to lab up Cisco specific use cases